Users Guide

Enable OSPFv3
1 Enable OSPFv3 globally and congure an OSPFv3 instance in CONFIGURATION mode.
router ospfv3 instance-number
2 Enter the interface information to congure the interface for OSPFv3 in INTERFACE mode.
interface ethernet node/slot/port[:subport]
3 Enable the interface in INTERFACE mode.
no shutdown
4 Disable the default switchport conguration and remove it from an interface or a LAG port in INTERFACE mode.
no switchport
5 Enable the OSPFv3 on an interface in INTERFACE mode.
ipv6 ospfv3 process-id area area-id
• process-id — Enter the OSPFv3 process ID for a specic OSPFv3 process, from 1 to 65535.
• area-id — Enter the OSPF area ID as an IP address in A.B.C.D format or number, from 1 to 65535.
Enable OSPFv3
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# exit
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# no shutdown
OS10(conf-if-eth1/1/1)# no switchport
OS10(conf-if-eth1/1/1)# ipv6 ospfv3 300 area 0.0.0.0
Enable OSPFv3 in a non-default VRF instance
1 Create the non-default VRF instance in which you want to enable OSPFv3:
ip vrf vrf-name
CONFIGURATION Mode
2 Enable OSPFv3 in the non-default VRF instance that you created earlier and congure an OSPFv3 instance in VRF CONFIGURATION
mode.
router ospfv3 instance-number vrf vrf-name
3 Enter the interface information to congure the interface for OSPFv3 in INTERFACE mode.
interface ethernet node/slot/port[:subport]
4 Enable the interface in INTERFACE mode.
no shutdown
5 Disable the default switchport conguration and remove it from an interface or a LAG port in INTERFACE mode.
no switchport
6 Associate the interface with the non-default VRF instance that you created earlier.
ip vrf forwarding vrf-name
7 Enable the OSPFv3 on an interface.
ipv6 ospfv3 process-id area area-id
• process-id — Enter the OSPFv3 process ID for a specic OSPFv3 process, from 1 to 65535.
• area-id — Enter the OSPF area ID as an IP address in A.B.C.D format or number, from 1 to 65535.
Enable OSPFv3
OS10(config)# ip vrf vrf-blue
OS10(config-vrf-blue)# router ospfv3 100 vrf vrf-blue
OS10(config-router-ospfv3-100)# exit
Layer 3
639