Users Guide

Remote Aggregation Status: false
MAC PHY Configuration:
Auto-neg supported: 1
Auto-neg enabled: 1
Auto-neg advertised capabilities:
1000BASE-T half duplex mode
Dell EMC Organization Specific Detail:
Originator: Switch
Service Tag: B8D1XC2
Product Base: base1
Product Serial Number: sn1
Product Part Number: pn1
Example (Interface)
OS10# show lldp neighbors interface ethernet 1/1/1
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
-----------------------------------------------------------------------
ethernet1/1/1 OS10 ethernet1/1/2 4:17:eb:f7:06:c4
Supported Releases 10.2.0E or later
show lldp timers
Displays the LLDP hold time, delay time, and update frequency interval conguration information.
Syntax
show lldp timers
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 6
Transmit interval in seconds: 30
Supported Releases 10.2.0E or later
show lldp tlv-select interface
Displays the TLVs enabled for an interface.
Syntax
show lldp tlv-select interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport] — Enter the Ethernet interface information, from 1 to 253.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp tlv-select interface ethernet 1/1/1
port-description
system-capabilities
system-description
system-name
port-vlan
mac-phy-config
388 Layer 2