Users Guide

lldp med tlv-select
Congures the LLDP-MED TLV type to transmit or receive.
Syntax
lldp med tlv-select {network—policy | inventory}
Parameters
• network-policy — Enable or disable the port description TLV.
• inventory — Enable or disable the system TLV.
Default Enabled
Command Mode INTERFACE
Usage Information None
Example
OS10(conf-if-eth1/1/3)# lldp med tlv-select network-policy
Supported Releases 10.2.0E or later
lldp port-description-tlv advertise
Species whether to advertise the interface description or the port id in the port description TLV.
Syntax
lldp port-description-tlv advertise [description | port-id]
Parameters
• description—Advertise interface description.
• port-id—Advertise port id.
Default Interface description is advertised.
Command Mode INTERFACE
Usage Information Determines whether to advertise the interface description or the port id in the port description TLV.
Example
OS10(conf-if-eth1/1/1)# lldp port-description-tlv advertise description
OS10(conf-if-eth1/1/1)# lldp port-description-tlv advertise port-id
Supported Releases 10.4.3.0 or later
lldp receive
Enables or disables the LLDP packet reception on a specic interface.
Syntax
lldp receive
Parameters None
Default Not congured
Command Mode INTERFACE
Usage Information Enable LLDP globally on the system before using the lldp receive command. The no version of this command
disables the reception of LLDP packets.
Layer 2 381