Users Guide

OS10(config-pmap-c)# set qos-group 2
OS10(config-pmap-c)# police cir 100 pir 100
View policy-map
OS10(config)# do show policy-map
Service-policy (control-plane) input: example-copp-policy-map-name
Class-map (control-plane): example-copp-class-map-name
set qos-group 2
police cir 100 bc 100 pir 100 be 100
Assign service-policy
Rate controlling the trac towards CPU requires conguring the control-plane type policy. To enable CoPP, apply the dened policy-map
to CONTROL-PLANE mode.
1 Enter CONTROL-PLANE mode from CONFIGURATION mode.
control-plane
2 Dene aninput type service-policy and congure a name for the service policy in CONTROL-PLANE mode.
service-policy input example-copp-policy-map-name
Assign control-plane service-policy
OS10(config)# control-plane
OS10(conf-control-plane)# service-policy input example-copp-policy-map-name
View control-plane service-policy
OS10(conf-control-plane)# do show qos control-plane
Service-policy (input): example-copp-policy-map-name
View conguration
Use show commands to display the protocol trac assigned to each control-plane queue and the current rate-limit applied to each queue.
Use the show command output to verify the CoPP conguration.
View CoPP conguration
OS10# show qos control-plane
Service-policy (input): example-copp-policy-map-name
View CMAP1 conguration
OS10# show class-map type control-plane example-copp-class-map-name
Class-map (control-plane): example-copp-class-map-name (match-any)
View CoPP service-policy
OS10# show policy-map type control-plane
Service-policy(control-plane) input: example-copp-policy-map-name
Class-map (control-plane): example-copp-class-map-name
set qos-group 2
police cir 100 bc 100 pir 100 be 100
View CoPP information
OS10# show control-plane info
Queue Min Rate Limit(in pps) Max Rate Limit(in pps)
Protocols
0 600 600 ISCSI UNKNOWN UNICAST
1 1000 1000 SFLOW
2 400 400 IGMP MLD PIM
3 600 1000 VLT NDS
Quality of service
1125