Service Manual

clear counters mac access-group
Clear counters for all or a specic MAC ACL.
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a congured MAC access list.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
mac access-group
Apply a MAC ACL to trac entering or exiting an interface. The following interface types can be used for VLAN , Physical interface,
Port channel interface. Enter into the interface mode and apply the mac acl in the following manner.
Syntax
Applying MAC Access group on a physical / port channel interfacemac access-group access-list-
name {in [vlan vlan-range] | out}
To delete a MAC access-group, use the no mac access-group mac-list-name command.
Parameters
access-list-name Enter the name of a congured MAC access list, up to 140 characters.
vlan vlan-range (OPTIONAL) Enter the keyword vlan and then enter a range of VLANs. The
range is from 1 to 4094 (you can use IDs 1 to 4094).
NOTE: This option is available only with the keywordin option.
in Enter the keyword in to congure the ACL to lter incoming trac.
out Enter the keyword out to congure the ACL to lter outgoing trac.
NOTE: The option is not available on the S-Series.
224
Access Control Lists (ACL)