Administrator Guide

Dell Networking CLI 155
Priority Flow Control
mode Configures the selection of interfaces used to
assign the IP address utilized for controller
connections.
OFC
openflow Enables OpenFlow on the switch (if disabled)
and enters into OpenFlow configuration mode.
GC
passive Sets the switch to wait for the controller to
initiate the connection.
OFC
protocol-version Selects the version of the protocol in which to
operate.
OFC
show openflow Displays OpenFlow configuration and status. PE,
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Data Center Bridging
Capability Exchange
Commands
Enables Priority-Flow-Control (PFC) on
an interface.
DCB
priority-flow-control priority Enables the priority group for lossless (no-
drop) or lossy (drop) behavior on the
selected interface.
DCB
clear priority-flow-control
statistics
Clears all or interface Priority-Flow-
Control statistics.
PE
show interfaces priority-
flow-control
Displays the global or interface priority
flow control status and statistics.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 155 Monday, January 25, 2016 1:25 PM