Administrator Guide

Differentiated Services 1527
match [any] Configure the match condition for the class-map.
Match any indicates that at least one match criteria
must match. This configuration does not affect the
processing of access-groups.
match class-map Add to the specified class definition, the set of
match conditions defined for another class.
match dstip6 Add to the specified class definition a match
condition based on the destination IPv6 address of a
packet.
match dstl4port Add to the specified class definition a match
condition based on the destination layer-4 port of a
packet using a single keyword, or a numeric
notation.
match ip6flowlbl Add to the specified class definition a match
condition based on the IPv6 flow label of a packet.
match ip dscp Add to the specified class definition a match
condition based on the value of the IP DiffServ
Code Point (DSCP) field in a packet.
match srcip6 Add to the specified class definition a match
condition based on the source IPv6 address of a
packet.
match srcl4port Add to the specified class definition a match
condition based on the source layer-4 port of a
packet using a single keyword, a numeric notation,
or a numeric range notation.
CLI Command Description