Administrator Guide

Layer 2 Switching Commands 728
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show diffserv
DiffServ Admin mode.......................... Enable
Class Table Size Current/Max................. 5 / 25
Class Rule Table Size Current/Max............ 6 / 150
Policy Table Size Current/Max................ 2 / 64
Policy Instance Table Size Current/Max....... 2 / 640
Policy Attribute Table Size Current/Max...... 2 / 1920
Service Table Size Current/Max............... 26 / 214
show diffserv service interface
Use this command to display policy service information for the specified
interface.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show diffserv service interface {interface-id} {in|out}
• interface-id—An Ethernet or port-channel identifier.
• in—Show ingress policies.
• out—Show egress policies.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes