Administrator Guide

Layer 2 Switching Commands 536
When the optional argument vlan vlan-id is used, the following additional
information appears:
When the optional argument detail is used, the command shows the global
information and the information for all Querier enabled VLANs as well as the
following information:
Querier Query Interval Shows the amount of time that a Snooping Querier
waits before sending out a periodic general query.
Querier Expiry Interval Displays the amount of time to wait in the Non-Querier
operational state before moving to a Querier state.
Parameter Description
MLD Snooping Querier
VLAN Mode
Indicates whether MLD Snooping Querier is active on
the VLAN.
Querier Election
Participate Mode
Indicates whether the MLD Snooping Querier
participates in querier election if it discovers the
presence of a querier in the VLAN.
Querier VLAN Address Shows the IP Address which will be used in the IPv6
header while sending out MLD queries.
Operational State Indicates whether MLD Snooping Querier is in
“Querier” or “Non-Querier” state. When the switch is
in Querier state it will send out periodic general queries.
When in Non-Querier state it will wait for moving to
Querier state and does not send out any queries.
Operational Version Indicates the version of MLD that will be used while
sending out the queries. This is defaulted to MLD v1
and it can not be changed.
Operational Max Response
Time
Displays the maximum response time the local querier
waits for a response from a multicast router.
Last Querier Address Indicates the IP address of the most recent Querier from
which a Query was received.
MLD Version Indicates the version of MLD.