Administrator Guide

Layer 2 Switching Commands 472
show gvrp configuration
Use the show gvrp configuration command to display GVRP configuration
information. Timer values are displayed. Other data shows whether GVRP is
enabled and which ports are running GVRP.
Syntax
show gvrp configuration [ interface-id ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command is valid for Ethernet and port-channel interfaces. If no
interface-id parameter is given, all interfaces are shown.
Example
The following example shows how to display GVRP configuration
information:
console# show gvrp configuration
Global GVRP Mode: Disabled
Join Leave LeaveAll Port VLAN
Interface Timer Timer Timer GVRP Mode Create Register
(centisecs) (centisecs) (centisecs) Forbid Forbid
----------- ----------- ----------- ----------- ----------- ------ ------
Gi1/0/1 20 60 1000 Disabled
Gi1/0/2 20 60 1000 Disabled
Gi1/0/3 20 60 1000 Disabled
Gi1/0/4 20 60 1000 Disabled
Gi1/0/5 20 60 1000 Disabled
Gi1/0/6 20 60 1000 Disabled
Gi1/0/7 20 60 1000 Disabled
Gi1/0/8 20 60 1000 Disabled
Gi1/0/9 20 60 1000 Disabled
Gi1/0/10 20 60 1000 Disabled