Administrator Guide

Switch Management Commands 2325
Subject: /CN=DELL/OU=Dell Networking/L=Round Rock/ST=TX/C=US/emailAddress=
[e-mail]
Finger print: 1873B936 88DC3411 BC8932EF 782134BA
The following example displays the HTTPS server configuration with DH Key
exchange disabled.
console(config)#show ip http server secure status
HTTPS Server is Disabled. Port : 443
DH Key exchange disabled. Parameters are being generated.
Certificate 1 is active.
Issued by: Dell Networking
Valid from to Oct 22 17:46:02 2017 GMT
Subject: /CN=DELL/OU=Dell Networking/L=Round Rock/ST=TX/C=US/emailAddress=
[e-mail]
Fingerprint: FA06E0DD138FA22A4D696A80171FF3D8
state
Use the state command in Crypto Certificate Generation or Crypto
Certificate Request mode to specify the state or province name.
Syntax
state state
• state — Specifies the state or province name. (Range: 1–64 characters)
Default Configuration
This command has no default configuration.
Command Mode
Crypto Certificate Generation or Crypto Certificate Request mode
User Guidelines
This command mode is entered using the crypto certificate request or crypto
certificate generate command.
Example
The following example shows how to specify the state of “TX.”
console(config-crypto-cert)#state TX