Administrator Guide

Switch Management Commands 2252
show supported switchtype
Use the show supported switchtype command to display information about
all supported switch types.
Syntax
show supported switchtype [switchindex]
• switchindex — Specifies the index into the database of the supported
switch types, indicating the type of the switch being preconfigured. The
switch index is a 32-bit integer. (Range: 0–65535)
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The switch SID is used when preconfiguring switches in a stack using the
member command in config-stack mode.
The following table describes the fields in the first example.
Field Description
Switch Index (SID) This field displays the index into the database of
supported switch types. This index is used when
preconfiguring a member to be added to the
stack.
Model Identifier This field displays the model identifier for the
supported switch type.
Management Preference This field indicates the management preference
value of the switch type.
Code Version This field displays the code load target identifier
of the switch type.