Administrator Guide

Switch Management Commands 1906
Example – Downloading new code to the switch
console#copy tftp://10.27.9.99/jmclendo/N4000v6.0.1.3.stk backup
Transfer Mode.................................. TFTP
Server IP Address.............................. 10.27.9.99
Source File Path............................... jmclendo/
Source Filename................................ N4000v6.0.1.3.stk
Data Type...................................... Code
Destination Filename........................... backup
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
File transfer in progress. Management access will be blocked for the duration
of the transfer. please wait...
TFTP Code transfer starting...
17128797 bytes transferred...
File contents are valid. Copying file to flash...
Attempting to send the STK file to other units in the stack...
File transfer operation completed successfully.
console#show bootvar
Image Descriptions
active :
backup :
Images currently available on Flash
unit active backup current-active next-active
----- ------------ ------------ ----------------- -----------------
1 6.0.0.8 6.0.1.3 6.0.0.8 6.0.0.8
After the file transfer completes, use the boot system command to select the
new image to run.