Administrator Guide

Layer 3 Routing Commands 1849
Track Route Reachable ......................... False
Track Route DecrementPriority ................. 20
Vlan 7 – Group 2
Primary IP Address............................. 192.168.5.65
VMAC Address................................... 0000.5E00.0202
Authentication Type............................ None
Priority....................................... 60
Configured Priority............................ 100
Advertisement Interval (secs).................. 10
Accept Mode ................................... Enable
Pre-empt Mode.................................. Enable
Pre-empt Delay................................. 0
Administrative Mode............................ Enable
State.......................................... Initialized
Timers Learn Mode.............................. Disable
Description ...................................
Track Interface................................ vlan 3
Track Interface State ......................... Down
Track Interface DecrementPriority ............. 20
Track Route (pfx/len) ......................... 10.10.10.0/24
Track Route Reachable ......................... False
Track Route DecrementPriority ................. 20
console#show vrrp brief
Interface Grp Prio IP Address Mode State
--------- --- ---- -------------- ------ ------------
V1 1 2 60 0.0.0.0 Disable Initialize
V1 2 5 70 192.168.5.55 Enable Initialize
show vrrp interface
Use the show vrrp interface command in User Exec or Privileged Exec mode
to display all configuration information and VRRP router statistics of a virtual
router configured on a specific interface.
Syntax
show vrrp interface {brief | vlan vlan-id [stats]}
• brief — Display summary information about each virtual router configured on
the switch.
• stats — Display the statistical information about each virtual router configured
on the VLAN.
• vlan-id — Display information about each virtual router configured on the
VLAN. Valid interface type (VLAN) and interface number (vlan-id).