Administrator Guide

Layer 3 Routing Commands 1644
Example
console#show ipv6 pim interface vlan 6
Slot/Port...................................... vlan 6
IP Address..................................... FE80::2FF:EDFF:FED0:2/128
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
Neighbor Count................................. 0
Designated Router.............................. FE80::2FF:EDFF:FED0:2
DR Priority.................................... 1
BSR Border..................................... Disabled
show ipv6 pim neighbor
Use the show ipv6 pim neighbor command to display IPv6 PIMSM neighbors
learned on the routing interfaces.
Syntax
show ipv6 pim neighbor [interface vlan vlan-id ]
• vlan-id — A valid VLAN ID value.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
If a VLAN interface is not specified, all neighbors are shown.
Example
console#show ipv6 pim neighbor
Slot/Port...................................... vlan 6
Neighbor Address............................... FE80::200:FF:FE00:33
Up Time (hh:mm:ss)............................. 00:00:12
Expiry Time (hh:mm:ss)......................... 00:01:34
DR Priority.................................... 0