Administrator Guide

Layer 3 Routing Commands 1621
show ip pim neighbor
Use the show ip pim neighbor command in User Exec or Privileged Exec
modes to display PIM neighbors discovered by PIMv2 Hello messages. If the
interface number is not specified, this command displays the neighbors
discovered on all the PIM-enabled interfaces.
Syntax
show ip pim neighbor [vlan vlan-id]
• vlan-id — A valid VLAN ID for which multicast routing has been enabled.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The following information is displayed.
Example
(console)#show ip pim neighbor vlan 10
Up Time Expiry Time
Neighbor Addr Interface hh:mm:ss hh:mm:ss
--------------- ---------- --------- -----------
192.168.10.2 VLAN0010 00:02:55 00:01:15
(console)#show ip pim neighbor
Neighbor Addr Interface Uptime Expiry Time
(HH:MM::SS) (HH:MM::SS)
Field Description
Neighbor Addr IP address of the PIM neighbor
Interface Interface number
Uptime Time since the neighbor is learned
Expiry Time Time remaining for the neighbor to expire