Administrator Guide

Dell EMC Networking CLI 148
Captive Portal
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
show dot1x interface
statistics
Displays 802.1X statistics for the specified
interface.
PE
show dot1x users Displays active 802.1X authenticated users for
the switch.
PE
clear dot1x authentication–
history
Clears the authentication history table captured
during successful and unsuccessful
authentication.
PE
dot1x guest-vlan Sets the guest VLAN on a port. IC
dot1x unauth-vlan Specifies the unauthenticated VLAN on a port. IC
show dot1x advanced Displays 802.1X advanced features for the
switch or specified interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
authentication timeout Configures the authentication timeout. CP
captive-portal Enables the captive portal configuration mode. GC
enable Globally enables captive portal. CPI
http port Configures an additional HTTP port for captive
portal to monitor.
CP
https port Configures an additional HTTPS port for
captive portal to monitor.
CP
show captive-portal Displays the status of captive portal. PE
show captive-portal status Reports the status of all captive portal instances
in the system.
PE
block Blocks all traffic for a captive portal
configuration.
CPI
configuration Enables the captive portal instance mode. CP
enable Enables a captive portal configuration. CPI
Command Description Mode
a