Administrator Guide

Layer 3 Routing Commands 1484
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N3100/N4000 series
switches.
Example
The following example defines the Boot/DHCP Relay information.
console#show ip dhcp relay
Maximum Hop Count.............................. 4
Minimum Wait Time (Seconds).................... 0
Circuit Id Option Mode....................... Disable
Circuit Id Option Check Mode................. Enable
show ip helper statistics
Use the show ip helper statistics command to display the number of DHCP
and other UDP packets processed and relayed by the UDP relay agent.
Syntax
show ip helper statistics [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.