Administrator Guide

Layer 3 Routing Commands 1235
Syntax
show bfd neighbor [details] [ip-address]
• details —Display additional information regarding each BFD neighbor,
including sent and received message counts.
• ip-address —The IPv4 or IPv6 address of a BFD neighbor. Limits the
output to the specific neighbor.
Default Configuration
There is no default configuration for this command.
Command Mode
User mode, Privileged Exec mode, Global Configuration mode, all show
modes
User Guidelines
The local address displayed in the output is the IP address of the interface
through which the neighbor is connected.
Update is displayed in the format dd hh:mm:ss where:
• dd is days
• hh is hours
• mm is minutes
• ss is seconds
The operational intervals are the intervals used as a result of negotiation with
the BFD link partner.
The following information is displayed.
Parameters Description
Our IP address The current IP address.
Neighbor IP address The IP address of the active BFD neighbor.
State The current state, either Up or Down.
Interface The current interface.
Uptime The amount of time the interface has been up.