Administrator Guide

Dell EMC Networking CLI 115
GVRP
show green-mode interface-
id
Displays the green-mode configuration and
operational status of the port. This command is
also used to display the per port configuration
and operational status of the green-mode. The
status is shown only for the modes supported on
the corresponding hardware platform whether
enabled or disabled.
PE
show green-mode Displays the green-mode configuration for the
whole system. The status is shown only for the
modes supported on the corresponding
hardware platform whether enabled or disabled.
PE
show green-mode eee-lpi-
history interface
Displays the interface green-mode EEE LPI
history.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear gvrp statistics Clears all the GVRP statistics information. PE
garp timer Adjusts the GARP application join, leave, and
leaveall GARP timer values.
IC
gvrp enable (Global
Configuration)
Enables GVRP globally. GC
gvrp enable (Interface
Configuration)
Enables GVRP on an interface. IC
gvrp registration-forbid Deregisters all VLANs, and prevents dynamic
VLAN registration on the port.
IC
gvrp vlan-creation-forbid Enables or disables dynamic VLAN creation. IC
show gvrp configuration Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
PE
show gvrp error-statistics Displays GVRP error statistics. UE
show gvrp statistics Displays GVRP statistics. UE
Command Description Mode
a