Administrator Guide

Layer 2 Switching Commands 454
Example
console#show green-mode gi1/0/1
Energy Detect Admin Mode............ Enabled
Operational Status.................. Active
Reason.............................. No Energy Detected
Short Reach Feature................. Not Available
EEE Admin Mode...................... Enabled
Rx Low Power Idle Event Count....... 0
Rx Low Power Idle Duration (uSec)... 0
Remote Tw_sys_rx
(μSec)
Integer that indicates the value of Tw_sys that the remote
system requests from the local system. This value maps from
the aLldpXdot3RemRxTwSys attribute.
Remote Tw_sys_rx
Echo (μSec)
Integer that indicates the value of Receive Tw_sys echoed back
by the remote system. This value maps from the
aLldpXdot3RemRxTwSysEcho attribute.
Remote Fallback
Tw_sys (μSec)
Integer that indicates the value of fallback Tw_sys that the
remote system is advertising.This attribute maps to the variable
RemFbSystemValue as defined in 78.4.2.3.
Tx_dll_enabled Initialization status of the EEE transmit Data Link Layer
management function on the local system.
Tx_dll_ready Data Link Layer ready: This variable indicates that the tx
system initialization is complete and is ready to update/receive
LLDPDU containing EEE TLV. This variable is updated by the
local system software.
Rx_dll_enabled Status of the EEE capability negotiation on the local system.
Rx_dll_ready Data Link Layer ready: This variable indicates that the rx
system initialization is complete and is ready to update/receive
LLDPDU containing EEE TLV. This variable is updated by the
local system software.
Power Saving (%) Percentage of Power saved by enabling EEE on the interface
since EEE counters are last cleared.
Time Since
Counters Last
Cleared
Time Since Counters Last Cleared (since the time of power up,
or after clear eee counters is executed)
Term Description
2CSNXXX_SWUM204.book Page 454 Monday, January 25, 2016 1:25 PM