Administrator Guide

Layer 2 Switching Commands 411
show interfaces debounce
Use the show interfaces debounce command to list the debounce
information for one or multiple interfaces. If no parameter is given, all
physical interfaces are shown.
Syntax
show interfaces debounce [ interface-id ]
• interface-id —A physical interface identifier (i.e., a 1G, 10G, or 40G
Ethernet interface) in standard interface format.
Default Configuration
Physical interfaces have a 100 ms debounce time enabled.
Command Mode
Exec mode, Privileged Exec, Global Configuration and all show modes.
User Guidelines
Use the link debounce time command to configure the debounce time for an
interface.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following example shows the output for representative interfaces.
console#show interfaces debounce
Interface Debounce Time (ms) Flaps
--------- ------------------ -------
Gi1/0/1 500 0
show interfaces description
Use the show interfaces description command in User Exec mode to display
the description for all configured interfaces.
2CSNXXX_SWUM204.book Page 411 Monday, January 25, 2016 1:25 PM