CLI Guide

Dell EMC Networking CLI 164
neighbor timers Overrides the global keepalive and hold timer
values as well as set the keepalive and hold
timers for a specific neighbor.
BR
neighbor update-source Configures BGP to use a specific IP address as
the source address for the TCP connection with
a neighbor.
BR
network (BGP Router
Configuration)
Configures BGP to advertise an address prefix. BR
network (IPv6 Address
Family Configuration)
Identifies network IPv6 prefixes that BGP
originates in route advertisements to its
neighbors.
IPAF
redistribute (BGP) Configures BGP to advertise routes learned by
means outside of BGP. BGP can redistribute
local (connected), static, OSPF, and RIP routes.
BR
redistribute (BGP IPv6) Configures BGP to redistribute non-BGP routes
from the IPv6 routing table.
IPAF
route-target Creates a list of export, import, or both route
target (RT) extended communities for the
specified VRF instance.
PE
set extcommunity rt Sets BGP extended community attributes for
the route target.
RMC
set extcommunity soo Sets BGP extended community attributes for
the site of origin.
RMC
show bgp ipv6 Displays IPv6 routes in the BGP routing table. UE,
PE,
GC
show bgp ipv6 aggregate-
address
Displays the configured IPv6 aggregate
addresses and indicates if each address is
currently active.
PE
show bgp ipv6 community Displays the IPv6 routes that belong to the
specified set of communities.
PE
show bgp ipv6 community-
list
Displays the IPv6 routes that match a specified
community list.
PE
Command Description Mode
a