Users Guide

Switch Management Commands 2299
If you supply a value for slot/port, the following additional information
appears as shown in the table below.
Example
console>show slot
Admin Power Configured Card
Slot Status State State Model ID Pluggable
----- ------ ------- ------- -------------------------------- ---------
1/0 Full Enable Enable Dell Networking N4032 No
1/1 Empty Disable Disable Yes
Command History
Description updated in the 6.4 release.
show supported cardtype
Use the show supported cardtype command to display information about all
card types supported in the system.
Configured Card Model Identifier The model identifier of the card
preconfigured in the slot. Model identifier
is a 32-character field used to identify a
card.
Pluggable Cards are pluggable or non-pluggable in
the slot.
Parameter Description
Inserted Card Model Identifier The model identifier of the card inserted
in the slot. Model identifier is a 32-
character field used to identify a card.
This field is displayed only if the slot is
full.
Inserted Card Description The card description. This field is
displayed only if the slot is full.
Configured Card Description The description of the card preconfigured
in the slot.
Parameter Description