Reference Guide

Alert and Event Messages
9 Dell EMC PowerStore Events and Alerts Reference Guide
Event code Severity Alert Call Home Message Repair Flow System Impact Knowledge Base Article
0x00201402 INFO FALSE FALSE
Appliance storage utilization
level is below 85%. Appliance
runs normally.
- - -
0x00201501 CRITICAL TRUE FALSE
Appliance cannot exit write
protection mode due to
insufficient system data
capacity.
Add additional storage to the
appliance or move storage
resources within the cluster to
another appliance or continues
to delete
volumes/snaps/objects.
Appliance remains in write
protection mode.
https://www.dell.com/support/
article/SLN317187
0x00201502 INFO FALSE FALSE
Appliance exits write protection
mode.
- - -
0x00201601 MINOR TRUE FALSE
The capacity utilization of
appliance's system data is
above 90 percent.
Add additional storage to the
appliance.
Cluster performance may be
impacted.
https://www.dell.com/support/
article/SLN322736
0x00201602 MAJOR TRUE TRUE
The appliance's system data has
reached full capacity.
Add additional storage to the
appliance or free up space on
some storage resources.
Appliance system data storage
capacity is limited. Write
operations may fail.
https://www.dell.com/support/
article/SLN322736
0x00201603 INFO FALSE FALSE
The capacity utilization of
appliance's system data is
below 90 percent.
- - -
0x00201604 MAJOR TRUE TRUE
The capacity utilization of
appliance's system data is
above 95 percent.
Add additional storage to the
appliance or free up space on
some storage resources.
Cluster performance may be
impacted.
https://www.dell.com/support/
article/SLN322736
0x00201701 INFO TRUE FALSE
Drive bus %(bus_num)
enclosure %(encl_num)
slot %(enclosure_slot) serial
number %(serial_number) is
initializing.
Wait for the drive to initialize.
Drive is unavailable until
initialization completes.
-
0x00201702 INFO FALSE FALSE
Drive bus %(bus_num)
enclosure %(encl_num)
slot %(enclosure_slot) serial
number %(serial_number) has
initialized.
- - -
0x00201703 INFO FALSE FALSE
Drive bus %(bus_num)
enclosure %(encl_num)
slot %(enclosure_slot) serial
number %(serial_number) has
failed to initialize.
- - -
0x00201801 CRITICAL TRUE TRUE Boot tier offline.
If the condition persists, contact
your service provider.
Boot tier metadata is used
during system initialization.
Data may become unavailable.
https://www.dell.com/support/
article/SLN317175
0x00201802 INFO FALSE FALSE Boot tier online. - - -
0x00201901 CRITICAL TRUE TRUE
Mapper metadata tier is offline.
Check the cabling and
connections between the
nodes. Also, review any drive or
Read and write operations are
not available.
https://www.dell.com/support/
article/SLN317175