Reference Guide

Alert and Event Messages
88 Dell EMC PowerStore Events and Alerts Reference Guide
Event code Severity Alert Call Home Message Repair Flow System Impact Knowledge Base Article
switch %(physical_switch_id),
with an MTU %(current_mtu)
that is too small.
0x01801701 INFO FALSE FALSE
MTU configuration on Ethernet
switch VLAN interface
corresponding to the intra-
cluster management (ICM)
network is correct.
- - -
0x01801702 MAJOR TRUE FALSE
Intra-cluster management (ICM)
network with VLAN
ID %(vlan_id) has corresponding
VLAN interface configured on
Ethernet
switch %(physical_switch_id),
with an MTU %(current_mtu)
that is too small.
Increase the MTU on VLAN
interface %(physical_switch_vla
n_iface_id) to at
least %(required_mtu).
-
https://www.dell.com/support/
article/SLN320925
0x01801801 INFO FALSE FALSE
MTU configuration on Ethernet
switch VLAN interface
corresponding to intra-cluster
data (ICD) network is correct.
- - -
0x01801802 MAJOR TRUE FALSE
Intra-cluster data (ICD) network
with VLAN ID %(vlan_id) has
corresponding VLAN interface
configured on Ethernet
switch %(physical_switch_id),
with an MTU %(current_mtu)
that is too small.
Increase the MTU on VLAN
interface %(physical_switch_vla
n_iface_id) to at
least %(required_mtu).
-
https://www.dell.com/support/
article/SLN320925
0x01801901 INFO FALSE FALSE
MTU configuration on Ethernet
switch VLAN interface
corresponding to storage
network is correct.
- - -
0x01801902 MAJOR TRUE FALSE
Storage network with VLAN
ID %(vlan_id) has corresponding
VLAN interface configured on
Ethernet
switch %(physical_switch_id),
with an MTU %(current_mtu)
that is too small.
Increase the MTU on VLAN
interface %(physical_switch_vla
n_iface_id) to at
least %(required_mtu).
-
https://www.dell.com/support/
article/SLN320925
0x01801A01 INFO FALSE FALSE
MTU configuration on Ethernet
switch VLAN interface
corresponding to the vMotion
network is correct.
- - -
0x01801A02 MAJOR TRUE FALSE
vMotion network with VLAN
ID %(vlan_id) has corresponding
VLAN interface configured on
Ethernet
Increase the MTU on VLAN
interface %(physical_switch_vla
n_iface_id) to at
least %(required_mtu).
-
https://www.dell.com/support/
article/SLN320925