Setup Guide
Overview
This chapter includes the following information.
Topics:
• PowerStore overview
• PowerStore T model deployment options and switch requirements
PowerStore overview
The different PowerStore models support different types of storage.
Table 1. PowerStore deployment models
Deployment Model numbers Supported configuration
PowerStore T model appliance
● 1000T
● 3000T
● 5000T
● 7000T
● 9000T
Supports block (Storage Area Network (SAN)), file (Network
Attached Storage (NAS)), and Virtual Volume (vVol) workloads
with the software stack deployed directly on the bare metal of the
system.
NOTE: Hypervisor deployments are not supported on this
model.
PowerStore X model appliance
● 1000X
● 3000X
● 5000X
● 7000X
● 9000X
Supports block (SAN-only), and vVol workloads with a hypervisor
installed on the system. The system software is deployed on the
hypervisor, which enables deployment of virtual machines (VMs)
and customer applications within the hardware.
NOTE: File (network attached storage (NAS)) services are not
supported on this model.
NOTE: The PowerStore Networking Guide for PowerStore X Models provides the documentation necessary to configure
networks and switches for PowerStore X model appliances.
Supporting documentation
In addition to reading through this document, you should also read through the following guides, prior to configuring your
switches and networks:
● PowerStore Planning Guide
● PowerStore Hardware Information Guide
PowerStore T model deployment options and switch
requirements
There are different options for deploying PowerStore T model.
There are different switch requirements for each type of deployment as described below.
1
Overview 7