Setup Guide

Use two cables that support connectivity between the high speed ports, for example 100Gbps Direct Attached Cables (DAC).
Table 26. Available switch-to-switch ports
PowerSwitch 100 GbE Ports
S4148F-ON 25, 26, 29, and 30
S4148T-ON 25, 26, 29, and 30
S5248F-ON 49-54
It is recommended that you use the same port numbers for the pair on the top and bottom switch.
Table 27. Steps to connect the switches together
1 Connect 100 GbE port 25 of the bottom switch (1) to 100 GbE port 25 of the top switch (2).
2 Connect 100 GbE port 26 of the bottom switch (1) to 100 GbE port 26 of the top switch (2).
Cable the Top-of-Rack switches to the core uplinks
Cable the Top-of-Rack (ToR) switches to the core uplinks.
Uplink A Uplink B
Core uplinks
3 41 2
Figure 24. ToR switch connections to the core uplinks
Cable Dell PowerSwitch Series for deployments with ToR switches
67