Install Guide
Table Of Contents
- 1. Unpack your system
- Decide where to install the base enclosure
- 2. Install the rails into your cabinet
- 3. Install the base enclosure onto the rails
- 4. Record the Dell Service Tag
- 5. Install optional expansion enclosures*
- 6. Connect the expansion enclosure to the base enclosure*
- 7. Connect the base enclosure to your switches
- 8. Power up
- a. Expansion enclosure
- b. Base enclosure
- 9. Attach the bezel
- a. Base enclosure
- b. Expansion enclosure
- 10. Discover your system
- What’s next?
- Other languages
Dell EMC PowerStore Quick Start Guide Page 6 of 8
8. Power up
a. Expansion enclosure
Connect the power cable to the power supply and close the retention bail over the base of the power cable. Connect
the other end of each power cable to PDU A and PDU B. Repeat for all enclosures racked.
b. Base enclosure
Plug each power cable into the base enclosure power supply unit and close the retention bail over the base of the
power cable
. Connect the other end of each power cable to PDU A and PDU B. After you connect the power cables,
the base enclosure automatically starts up.
CL5992