Owners Manual

Figure 72. Top view of the node
NOTE: The leftmost DIMM slot is 23, and the slots decrease sequentially to slot 0 on the far right.
2. Depress the white or black retaining tabs downward to free the DIMM from its slot.
3. Remove the faulted DIMM.
Figure 73. Removing the DIMM
Install the dual inline memory module
Steps
1. Touching only the outside edges of the DIMM, align the DIMM with the connector.
2. Firmly push the carrier straight down into the connector.
When the DIMM is fully seated, you will hear a snap, and feel the connector latches click into place.
Base enclosure service procedures
63