Owners Manual

Figure 2. Installing the system in the enclosure

Cable the base enclosure appliance to switches

For switch cabling information, refer to the PowerStore Networking Guide for PowerStore T Models or PowerStore Networking

Guide for PowerStore X Models.

Connect power cables

Prerequisites

If you are also installing an expansion enclosure, wait to power up the base enclosure until after you have powered up the

expansion enclosure.

Steps

1. Plug each power cable into the base enclosure power supply.

Figure 3. Inserting the power cable

2. Connect the other end of the power cable to the power distribution unit (PDU) on the rack.

Install a new base enclosure and optional expansion enclosure