Release Notes

Known Issues
9 Dell EMC PowerStore Release Notes
Issue ID Functional Area Description Workaround/Resolution
MDT-155853 Monitoring
If there is a critical capacity based
forecasting alert, a migration
recommendation repair flow can be
used to migrate storage to another
appliance. It is possible that after
migration completes, the daily
forecast used to trigger the alert will
not be updated on the source
appliance and the alert will not be
cleared until the next daily forecast.
After the forecast is triggered again,
the capacity based forecast on the
source and destination appliance may
be inaccurate as a significant amount
of storage is migrated.
None
MDT-134036 Monitoring
When there is a contention of
resources, the performance policy
associated with the volume gets
applied. In the current release, you
may not notice much difference
between the High and Medium
performance policies. For volumes
with Low performance policy, expect
to see a noticeable difference in the
amount of I/O operations serviced as
compared to volumes with High or
Medium performance policies.
None
MDT-146346 Notifications and
Alerts
Some hardware alert states may
persist for a short time after the health
of the object has been restored. The
alert states eventually resolve with the
correct state.
None
MDT-153335 PowerStore CLI The PowerStore CLI does not show
all the required information for metrics
when a roll-up result is returned for
long interval values.
It is recommended that you use the
REST interface to query metrics.
You can also use any REST client
(cURL, Insomnia, Postman, etc.) or
web browser.
MDT-118394 PowerStore
Manager(GUI)
Uploading an upgrade package that is
larger than 4 GB with Microsoft Edge
or Internet Explorer fails.
Try again with a different browser.
MDT-86305 PowerStore
Manager(GUI)
When you power down a node in
PowerStore Manager, the screen
does not automatically refresh the
state to indicate that the node is
getting powered off.
On the Hardware tab, click the
Refresh icon (appears on the top
right corner of the tab, next to the
base enclosure image) or refresh the
browser page.