Reference Guide

of network scaling. If the IP port is not used by an iSCSI connection, this attribute should be
empty.
available_usages
Type: array of enumerated values ("External_Replication", "ISCSI", "ISCSI_Default",
"Management")
Available IP port usages.
current_usages
Type: array of enumerated values ("External_Replication", "ISCSI", "ISCSI_Default",
"Management")
Current IP port usages.
bond_id
Type: string
Unique identifier of the bond on top of which the IP port is configured. If the IP port is
configured on top of an Ethernet front-end port, this attribute should be empty.
eth_port_id
Type: string
Unique identifier of the physical Ethernet front-end port on top of which the IP port is
configured. This attribute can be set when the IP port is used by a Unified appliance. It
should be empty if the IP port is used by a Unified+ appliance or if the IP port is configured
on top of a bond on a Unified appliance.
veth_port_id
Type: string
Unique identifier of the virtual Ethernet front-end port on top of which the IP port is
configured. This attribute can be set when the IP port is used by a Unified+ appliance. For a
Unified appliance, the value of veth_port_id should be empty.
available_usages_l10n
Type: array of strings
Localized message array corresponding to available_usages.
current_usages_l10n
Type: array of strings
Localized message array corresponding to current_usages.
ip_pool_addresses
This is the inverse of the resource type ip_pool_address association. See ip_pool_address for
more details
250
Dell EMC PowerStore CLI Reference Guide