Specifications

Dell
PowerEdge T710 Technical Guide 48
 Large U-shaped baskets to support dense cable loads
 Open vent pattern for optimal airflow
 Fully reversible (can be mounted on either side) with no conversion required
 Hook-and-loop straps rather eliminate the risk of cable damage during cycling
 A low profile fixed tray to both support and retain the CMA in its fully closed position
 Both the CMA and the tray mount without the use of tools via simple and intuitive snap-in
designs
14.4 Rack View
The T710 ReadyRails sliding rails are a ―drop-in‖ design, meaning that the system is installed
vertically into the rails by inserting the shoulder nuts on the sides of the system into the J-slots in
the inner rail members with the rails in the fully extended position.
T710 Mounted in the C1 Sliding Rails Figure 11.
The T710 CMA can be mounted to either side of the rails without the use of tools or the need for
conversion.
T710 CMA Mounted on the Left Side Figure 12.