CLI Guide

Table Of Contents
Table 65. Details of hwinventory (continued)
racadm hwinventory export -f <filename> -u <username> -p <password> -l
<CIFS, NFS, HTTP, or HTTPS share>
Input
<FQDD> Specifies the FQDD of the target device.
FQDD NIC.Slot.12
NOTE: The hwinventory subcommand supports NIC, Infiniband and FC FQDDs only.
-f Exported Hardware Inventory filename.
-u Username of the remote share to where the file must be exported. Specify user name in a
domain as domain/username
-p Password for the remote share to where the file must be exported.
-l Network share location to where the Hardware Inventory must be exported.
Examples
To get the hwinventory, run the following command:
racadm hwinventory
-------------------------HARDWARE INVENTORY------------------------
[InstanceID: Battery.Integrated.1:RAID.Slot.4-1]
Device Type = ControllerBattery
DeviceDescription = Battery on RAID Controller in Slot 4
FQDD = Battery.Integrated.1:RAID.Slot.4-1
InstanceID = Battery.Integrated.1:RAID.Slot.4-1
PrimaryStatus = OK
RAIDState = Ready
-------------------------------------------------------------------
[InstanceID: RAID.Slot.4-1]
Device Type = Controller
AlarmState = Alarm Not present
AutoConfigBehavior = Off
BootVirtualDiskFQDD = Disk.Virtual.0:RAID.Slot.4-1
Bus = AF
CacheSizeInMB = 8192 MB
CachecadeCapability = Cachecade Virtual Disk not supported
ConfigLockdownCapable = False
ConfigLockdownState = Disabled
ConnectorCount = 2
ControllerFirmwareVersion = 50.5.1-1733
CurrentControllerMode = RAID
Device = 0
DeviceCardDataBusWidth = 16x or x16
DeviceCardManufacturer = DELL
DeviceCardSlotLength = LongLength
DeviceCardSlotType = PCI Express Gen3
DeviceDescription = RAID Controller in Slot 4
DriverVersion = 7.705.08.00
EncryptionCapability = Local Key Management and Secure Enterprise Key Manager Ca
pable
EncryptionMode = Secure Enterprise Key Manager Failed
FQDD = RAID.Slot.4-1
Function = 0
InstanceID = RAID.Slot.4-1
LastSystemInventoryTime = 2020-11-06T23:13:52
LastUpdateTime = 2020-11-06T23:13:52
MaxAvailablePCILinkSpeed = Not Applicable
MaxPossiblePCILinkSpeed = Not Applicable
PCIDeviceID = 16
PCISlot = 4
PCISubDeviceID = 1FCB
PCISubVendorID = 1028
PCIVendorID = 1000
PatrolReadState = Stopped
PersistentHotspare = Disabled
PrimaryStatus = OK
ProductName = PERC H740P Adapter
RealtimeCapability = Capable
68
RACADM Subcommand Details