CLI Guide

Table Of Contents
gettracelog
Table 58. Details of gettracelog
Description
Lists all the trace login entries of iDRAC.
Synopsis
racadm gettracelog [-i]
racadm gettracelog [-s <start>] [-c <count>]
Input
i Displays the number of entries in iDRAC trace log.
-c Specifies the number of records to display.
-s Specifies the starting record to display.
Output
The default output display shows the record number, timestamp, source and description. The timestamp
begins at midnight, January 1 and increases until the system starts. After the system starts, the systems
timestamp is used.
Example
Display entire log
racadm gettracelog
Display number of records in log
racadm gettracelog -i
Total Records: 228
getversion
Table 59. Details of getversion
Description Displays the current software version, model and generation information, and whether the target device
can be updated.
Synopsis
racadm getversion
racadm getversion [-b | -c | i]
racadm getversion [-f <filter>]
Input
-c Displays the server's current CPLD version.
-b Displays the server's current BIOS version.
-i Displays the server's current IDSDM version.
-f <filter> Filters the components and must be one of the following values:
bios: BIOS
idrac: iDRAC
lc: Lifecycle Controller
idsdm: SD card
racadm getversion -c
Table 60. Details of
racadm getversion -c
<
Server
> <
CPLD Version
> <
Blade Type
>
server-1 1.0.5 PowerEdgeM520
RACADM Subcommand Details 63