Owners Manual
Table Of Contents
- Dell EMC PowerEdge T440 Installation and Service Manual
- Dell EMC PowerEdge T440 system overview
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System feet
- Inside the system
- Caster wheels – optional
- System cover
- Air shroud
- Drives
- Removing a drive blank
- Installing a drive blank
- Removing a drive carrier
- Installing a drive carrier
- Removing the drive from the drive carrier
- Installing a drive into the drive carrier
- Removing a 2.5-inch drive from a 3.5-inch drive adapter
- Installing a 2.5-inch drive into a 3.5-inch drive adapter
- Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
- Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier
- Optical drives and tape drives
- Cabled drives
- Drive backplane
- System memory
- Cooling fans
- Optional internal USB memory key
- Expansion card holder
- Expansion cards
- M.2 SSD module
- Optional MicroSD or vFlash card
- Optional IDSDM or vFlash module
- Processors and heat sinks
- Power supply units
- Power interposer board
- System battery
- Control panel assembly
- System board
- Trusted Platform Module
- Converting the system from tower mode to rack mode
- Updating the system BIOS
- Jumpers and connectors
- System diagnostics
- Getting help
- Documentation resources
Table 3. Front panel features
Item Components Icon Description
3 Status LED indicator
panel
N/A
Indicate the status of the system. For more information, see the
Dell EMC PowerEdge T440 Technical Specifications on the product
documentation page.
4 Information tag N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If you
have opted for the secure default access to iDRAC, the Information tag
also contains the iDRAC secure default password.
5 USB port 2.0 The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
6 USB port 3.0 The USB port is USB 3.0 compliant.
7 Optical drive bay N/A Enable you to install drives that are supported on your system.
For more information, see the Dell EMC PowerEdge T440 Technical
Specifications on the product documentation page.
8 Drive slot N/A Enables you to install TBUs for 8x and 16x backplane configurations, or
drive blank in the empty drive slot to maintain proper system cooling.
9 Physical drives N/A 3.5-inch drives and 2.5-inch drives/SSDs.
10 Rack ear N/A Enables you to convert the tower system to a rack system.
Dell EMC PowerEdge T440 system overview 13