Owners Manual

Option Description
• Legacy
• UEFI
Advanced Boot Options Allows you to Enable Legacy Option ROMs. The available options are:
• Enable Legacy Option ROMs
• Enable Attempt Legacy Boot
By default, the Enable Legacy Option ROMs option is enabled.
Date/Time Allows you to set the date and time on the system. The changes to the system date and time takes
effect immediately.
Table 23. System configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The available options are:
• Enable UEFI Network Stack
• Disabled
NOTE: You can use the Disabled option, only if Active Management Technology
(AMT) option is disabled.
• Enabled
• Enabled w/PXE
By default, the Enabled w/PXE option is selected.
Serial Port Identifies and defines the serial port settings. You can set the serial port to:
• Disabled
• COM1
• COM2
• COM3
• COM4
NOTE: The operating system may allocate resources even if the Serial port setting is
disabled.
By default, the COM1 option is selected.
SATA Operation Allows you to configure the internal SATA hard-drive controller. The available options are:
• Disabled
• AHCI
• RAID On
By default, the RAID On option is selected.
Drives Allows you to configure the SATA drives on the system board. The available options are:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
By default, all SATA drives are selected.
SMART Reporting Specifies the hard-drive errors for the integrated drives that are reported during system startup.
This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification.
SMART Reporting is set to Enable SMART Reporting. By default, this option is disabled.
USB Configuration Allows you to enable or disable the USB port configuration. The available options are:
• Enable Boot Support
• Enable Front USB Ports
24 System Setup