Owners Manual

Figure 17. Removing the hard drive cage
a. hard drive cage latch
b. hard drive cage guide screw (2)
c. hard drive cage
Next steps
1. Install the hard drive cage.
2. If disconnected, connect the power and data cables to the hard drives and the optical drive in the hard drive cage.
3. Install the bezel.
4. Reconnect the peripherals disconnected from the control panel assembly.
5. Follow the procedure listed in After working inside your system on page 43.
Related tasks
Removing the bezel on page 45
Installing the hard drive cage on page 54
Installing the bezel on page 46
Installing the hard drive cage
Prerequisites
1. Ensure that you follow the Safety instructions on page 42.
2. Follow the procedure listed in Before working inside your system on page 43.
3. Disconnect all peripherals connected to the control panel assembly.
4. Remove the bezel.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
54 Installing and removing system components