Owners Manual

Figure 24. Closing the memory riser
a. memory riser
b. flip out bracket (2)
c. memory riser handle
1. Install the memory riser.
2. Follow the procedure listed in the After working inside your system section.
3. Press F2 to enter System Setup, and check the System Memory setting.
The system should have already changed the value to reflect the installed memory.
4. If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory module
is firmly seated in the memory module socket.
5. Run the system memory test in system diagnostics.
Related references
Safety instructions on page 60
Related tasks
Before working inside your system on page 61
Installing a memory riser on page 74
After working inside your system on page 61
Memory riser and fan cage
The memory risers and fans are installed and secured in the memory riser and fan cage.
Removing the memory riser and fan cage
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
WARNING: To avoid damage to the memory riser and fan cage, you must remove all the memory risers and
cooling fans before removing the memory riser and fan cage.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the following:
Installing and removing system components
79