CLI Guide

FQDD = Enclosure.Internal.0-1:RAID.Slot.4-1
FanCount = 0
InstanceID = Enclosure.Internal.0-1:RAID.Slot.4-1
LastSystemInventoryTime = 2020-11-06T23:13:52
LastUpdateTime = 2020-11-06T23:13:52
PSUCount = 0
PrimaryStatus = OK
ProductName = BP14G+ 0:1
RollupStatus = OK
SlotCount = 8
State = Ready
TempProbeCount = 0
Version = 4.2
WiredOrder = 1
-------------------------------------------------------------------
[InstanceID: Fan.Embedded.1]
Device Type = Fan
ActiveCooling = 1
BaseUnits = RPM
CurrentReading = 6840 RPM
DeviceDescription = Fan 1
FQDD = Fan.Embedded.1
FanType = StandardPerformance
InstanceID = Fan.Embedded.1
LastSystemInventoryTime = 2020-11-06T23:13:06
LastUpdateTime = 2020-12-09T18:33:49
PWM = 32 %
PrimaryStatus = OK
RateUnits = None
RedundancyStatus = Fully Redundant
UnitModifier = 0
VariableSpeed = 1
-------------------------------------------------------------------
[InstanceID: Fan.Embedded.2]
Device Type = Fan
ActiveCooling = 1
BaseUnits = RPM
CurrentReading = 6720 RPM
DeviceDescription = Fan 2
FQDD = Fan.Embedded.2
FanType = StandardPerformance
InstanceID = Fan.Embedded.2
LastSystemInventoryTime = 2020-11-06T23:13:06
LastUpdateTime = 2020-12-09T18:33:49
PWM = 32 %
PrimaryStatus = OK
RateUnits = None
RedundancyStatus = Fully Redundant
UnitModifier = 0
VariableSpeed = 1
-------------------------------------------------------------------
[InstanceID: Fan.Embedded.3]
Device Type = Fan
ActiveCooling = 1
BaseUnits = RPM
CurrentReading = 6840 RPM
DeviceDescription = Fan 3
FQDD = Fan.Embedded.3
FanType = StandardPerformance
InstanceID = Fan.Embedded.3
LastSystemInventoryTime = 2020-11-06T23:13:06
LastUpdateTime = 2020-12-09T18:33:49
PWM = 32 %
PrimaryStatus = OK
RateUnits = None
RedundancyStatus = Fully Redundant
UnitModifier = 0
VariableSpeed = 1
-------------------------------------------------------------------
72
RACADM Subcommand Details