CLI Guide

○ The following command clears the current foreign configuration from the controller:
racadm storage clearconfig:RAID.Integrated.1-1
NOTE: After a resetconfig or clearconfig operation, the data cannot be reversed.
● To blink or unblink the PCIeSSD device.
○ The following command blinks the specified PCIeSSD device:
racadm storage blink:Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
STOR095 : Storage operation is successfully completed.
○ The following command unblinks the specified PCIeSSD device:
racadm storage unblink:Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
STOR095 : Storage operation is successfully completed.
● To prepare the specified PCIeSSD device for removal, run the following command:
racadm storage preparetoremove: Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
STOR089 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job with --realtime
option.
To create the required commit jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm
help jobqueue”
● To perform a cryptographic erase operation on the specified PCIeSSD device, run the following command:
racadm storage secureerase: Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
RAC1040 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job, and then restart
the server.
To create the required commit and reboot jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm
help jobqueue”
● To perform a cryptographic erase operation on PCIeSSD, SED or ISE (Instant Scramble Erase) device, run the following
command:
racadm storage cryptographicerase:<SED FQDD>
● To request iDRAC to rekey only a specific storage controller
racadm storage rekey:RAID.Integrated.1-1
supportassist
Table 102. Details of supportassist
Description Allows you to perform supportassist operations such as:
● collect : Collects the supportassist data and exports to local share, or remote share, or Dell site
depending on the parameters given in the command. You can specify the type of the logs to be in the
collect command. To run this command, user must accept the End User License Agreement (EULA).
● register : Allows registration of supportassist to enable related features.
● exportlastcollection : Exports the last collected supportassist data to the share which is
mentioned in the command or to the default share. Default share can be configured using the
supportassist attributes.
● accepteula : Accepts the End User License Agreement (EULA).
144 RACADM Subcommand Details