CLI Guide

Table 101. Details of storage (continued)
● To generate and view information about the inventory of physical disk drives, run the following
command:
racadm storage get pdisks
racadm storage get pdisks -o
racadm storage get pdisks -o -p <property names separated by comma>
racadm storage get pdisks --refkey <Enclosure/Backplanes FQDDs
separated by comma>
racadm storage get pdisks --refkey <Enclosure/Backplanes FQDDs
separated by comma> -o
racadm storage get pdisks --refkey <Enclosure/Backplanes FQDDs
separated by comma> -o -p <property names separated by comma>
● To get the list of physical disks, run the following command:
racadm storage get pdisks
● To get the properties of a physical disk, run the following command:
racadm storage get pdisks:<PD FQDD>
● To get a list of physical disks in a virtual disk, run the following command:
racadm storage get pdisks -vdkey:<VD FQDD>
● To generate and view information about the inventory of fans, run the following command:
racadm storage get fans --refkey <Enclosure FQDDs separated by comma>
racadm storage get fans --refkey <Enclosure FQDDs separated by comma > -
o
racadm storage get fans --refkey <Enclosure FQDDs separated by comma> -
o -p <property names separated by comma>
● To generate and view information about the inventory of EMMs, run the following command:
racadm storage get emms -refkey <Enclosure FQDDs separated by comma>
racadm storage get emms --refkey <Enclosure FQDDs separated by comma> -o
racadm storage get emms --refkey <Enclosure FQDDs separated by comma> -
o -p <property names separated by comma>
● To generate and view information about the inventory of PSU, run the following command:
racadm storage get psus -refkey <Enclosure FQDDs separated by comma>
racadm storage get psus --refkey <Enclosure FQDDs separated by comma> -o
racadm storage get psus --refkey <Enclosure FQDDs separated by comma> -
o -p <property names separated by comma>
126
RACADM Subcommand Details