Users Guide

Table 4. Virtual disk specifications for PERC S150 with SATA configuration (continued)
Specification PERC S150
Maximum number of physical disks in a volume 1
Maximum number of physical disks in a RAID 0 8
Maximum number of physical disks in a RAID 1 2
Maximum number of physical disks in a RAID 5 8
Maximum number of physical disks in a RAID 10 8
Minimum number of physical disks in a volume 1
Minimum number of physical disks in a RAID 0 2
Minimum number of physical disks in a RAID 1 2
Minimum number of physical disks in a RAID 5 3
Minimum number of physical disks in a RAID 10 4
NOTE: The configurations that are listed in the table above may vary with the hard-drive backplane of your system.
Table 5. Virtual disk specifications for PERC S150 with NVMe configuration
Specification PERC S150
Maximum number of physical disks supported 30
Maximum number of virtual disks supported 30
NOTE: The maximum number of virtual disks may exceed 30 when physical disks are migrated from any other
configuration or a disk in Ready state is converted to a non-RAID disk.
Maximum number of virtual disks supported from a single
disk group
8
Minimum virtual disk size 102 MB
Maximum number of physical disks per virtual disk 8
Maximum number of virtual disks per physical disk 8
Maximum number of physical disks in a volume 1
Maximum number of physical disks in a RAID 0 8
Maximum number of physical disks in a RAID 1 2
Maximum number of physical disks in a RAID 5 8
Maximum number of physical disks in a RAID 10 8
Minimum number of physical disks in a volume 1
Minimum number of physical disks in a RAID 0 2
Minimum number of physical disks in a RAID 1 2
Minimum number of physical disks in a RAID 5 3
Minimum number of physical disks in a RAID 10 4
Supported operating systems
The S150 controller supports the following operating systems:
NOTE:
It is highly recommended to see Dell EMC Enterprise operating systems support section to view the information on
the supported operating systems by a specific server.
8 Overview