Owners Manual

Figure 137. Removing the 2.5 inch drive rear backplane
Next steps
Install the 2.5 inch drive rear backplane.
Installing the 2.5 inch drive rear backplane
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1. Use the hooks on the rear drive cage as guides to align the drive backplane.
2. Lower the backplane into the system until it is firmly seated.
3. Using Phillips #2 screwdriver, replace the screws to secure the backplane to the rear drive cage.
Figure 138. Installing the 2.5 inch drive rear backplane
Next steps
1. Install all the drives.
2. Connect all the cables to the backplane.
3. Follow the procedure listed in After working inside your system.
144
Installing and removing system components