Owner's manual

64 Using the System Setup Program and UEFI Boot Manager
Integrated Devices Screen
Hard-Disk Drive
Sequence
Determines the order in which the BIOS will attempt to
boot from hard-drives in the system during system
startup.
USB Flash Drive
Emulation Type
(Auto default)
Determines the emulation type for a USB flash drive.
If Boot Mode is set to UEFI, this field is disabled.
Boot Sequence Retry
(Disabled default)
If this field is enabled and the system has failed to boot,
the system reattempts to boot after 30 seconds.
Option Description
Integrated SAS
Controller
(Enabled default)
Enables or disables the integrated SAS controller.
User Accessible USB
Ports
(All Ports On default)
Enables or disables the user-accessible USB ports. Options
are All Ports On, Only Back Ports On, and All Ports Off.
Internal USB Port 1
(On default)
Enables or disables the internal USB port.
Internal USB Port 2
(On default)
Enables or disables the internal USB port.
Embedded NIC1 and
NIC2 (Enabled default)
Enables or disables the operating system interface of the
embedded NICs. The NICs may also be accessed through
the system’s management controller.
Embedded Gb NICx
(Enabled default)
Enables or disables the integrated NIC. Options are
Enabled and Enabled with PXE. PXE support allows the
system to boot from the network.
MAC Address Displays the MAC address for the integrated 10/100/1000
NIC.
Option Description
R415HOM.book Page 64 Friday, September 24, 2010 9:37 AM