API Guide

Table 93. Parameters for NetworkDeviceFunction Settings(continued)
Parameter Type Description
SecondaryTargetTCPPort Int64 The TCP port for the Secondary iSCSI boot
target.
SecondaryLUN Int64 The logical unit number (LUN) for the Secondary
iSCSI boot target.
SecondaryVLANEnable Boolean It indicates if this VLAN is enabled for the
Secondary iSCSI boot target.
SecondaryVLANId Int64 The 802.1q VLAN ID to use for iSCSI boot from
the Secondary target. This VLAN ID is only used if
SecondaryVLANEnable is true.
SecondaryDNS String The IPv6 or IPv4 address of the Secondary DNS
server for the iSCSI boot initiator.
IPMaskDNSViaDHCP Boolean A boolean indicating whether the iSCSI boot
initiator uses DHCP to obtain the iniator name, IP
address, and netmask.
AuthenticationMethod NetworkDeviceFunction.v1_0_0.AuthenticationM
ethod
The iSCSI boot authentication method for this
network device function.
CHAPUsername String The username for CHAP authentication.
CHAPSecret String The shared secret for CHAP authentication.
Status codes
Table 94. Status codes
HTTP status code Extended information Error message code
200
202
400
• Base.1.0.PropertyValueTypeError
• Base.1.0.PropertyUnknown
403 Base.1.0.InsufficientPrivilege RAC0506
405 Base.1.0.GeneralError SYS402
500 Base.1.0.InternalError
NetworkInterface collection
Description
This resource is used to represent the collection of the Network subsystem under ComputerSystem.
URL
/redfish/v1/Systems/System.Embedded.1/NetworkInterfaces
Redfish resources
61