CLI Guide

ping

Table 70. Details of ping

Description Verifies if the destination IP address is reachable from iDRAC with the current routing-table contents. A destination

IP address is required. Based on the current routing-table contents, an ICMP echo packet is sent to the destination

IP address.

To run this subcommand, you must have the Debug privilege.

Synopsis

racadm ping <ipaddress>

Input <ipaddress> — The IP address of the remote endpoint to ping.

Output

PING 192.168.0 (192.168.0): 56 data bytes64 bytes from 192.168.0: seq=0

ttl=64 time=4.121 ms

192.168.0 ping statistics

1 packets transmitted, 1 packets received, 0 percent packet lossround-trip

min/avg/max = 4.121/4.121/4.121 ms

ping6

Table 71. Details of ping6

Description

Verifies if the destination IPv6 address is reachable from iDRAC or with the current routing-table contents. A

destination IPv6 address is required. Based on the current routing-table contents, an ICMP echo packet is sent to

the destination IPv6 address.

To run this subcommand, you must have Debug privilege.

Synopsis

racadm ping6 <ipv6address>

Input <ipv6address> — the IPv6 address of the remote endpoint to ping.

Example

Pinging 2011:de11:bdc:194::31 from 2011:de11:bdc:194::101 with 32 bytes of

data:

Reply from 2011:de11:bdc:194::31: time<1ms

Ping statistics for 2011:de11:bdc:194::31:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

RACADM Proxy

Table 72. Details of RACADM Proxy

Description

On the PowerEdge FX2/FX2s systems, you can manage the compute sleds and CMC using

the iDRAC’s RACADM Proxy feature that redirects commands from iDRAC to CMC. You

can return the CMC response to local or remote RACADM.to access the CMC configuration and reporting

features without placing the CMC on the management network. The CMC configuration commands are supported

through local proxy when local configuration is enabled on iDRAC.

NOTE: Local racadm and local racadm proxy runs with root user privilege.

RACADM Subcommand Details 97