CLI Reference Guide

6 Command Groups

www.dell.com | support.dell.com

Address Table Commands

ip https authentication Specifies authentication methods for https. GC

telnet or console.

password Specifies a password on a line. LC

password Specifies a user password UE

show authentication methods Shows information about authentication methods PE

show user accounts Displays information about the local user database PE

show users login-history Displays information about login histories of users PE

username Establishes a username-based authentication system. GC

*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.

Command Description Mode*

bridge address Adds a static MAC-layer station source address to the

bridge table.

bridge aging-time Sets the address table aging time. GC

bridge multicast address Registers MAC-layer Multicast addresses to the bridge

table, and adds static ports to the group.

bridge multicast filtering Enables filtering of Multicast addresses. GC

bridge multicast forbidden

address

Forbids adding a specific Multicast address to specific

ports.

bridge multicast forbidden

forward-unregistered

Forbids a port to be a forwarding-unregistered-multicast-

addresses port.

bridge multicast forward-all Enables forwarding of all Multicast packets on a port. IC

bridge multicast forward-

unregistered

Enables the forwarding of unregistered multicast addresses IC

clear bridge Removes any learned entries from the forwarding database. PE

port security Disables new address learning on an interface. IC

port security max Configures the maximum addresses that can be learned on

the port while the port is in port security mode.

show bridge address-table Displays dynamically created entries in the bridge-

forwarding database.

Command Description Mode*