CLI Reference Guide

318 802.1x Commands
www.dell.com | support.dell.com
User Guidelines
This command has no user guidelines.
Example
The following command manually initiates a re-authentication of the 802.1x-enabled port.
console# dot1x re-authenticate ethernet 1/g16
dot1x re-authentication
Use the dot1x re-authentication command in Interface Configuration mode to enable periodic
re-authentication of the client. To return to the default setting, use the
no form of this command.
Syntax
dot1x re-authentication
no dot1x re-authentication
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables periodic re-authentication of the client.
console(config)# interface ethernet 1/g16
console(config-if-1/g16)# dot1x re-authentication
dot1x system-auth-control
Use the dot1x system-auth-control command in Global Configuration mode to enable 802.1x
globally. To disable 802.1x globally, use the
no form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control